Availability: 34 in stock
If you cut melamine on a regular basis, this is the blade you should use. It has the same features as our regular melamine blades – the MB series and MSB series – such as thicker than standard plate, high tooth count, and the H-ATB grind, but this blade has long-lasting DITEC carbide tips.
Features:
Exclusive DITEC Carbide Tips
Higher Reliability and Lower Maintenance
Low Noise Level
Laser Cut Saw Bodies
Excellent Cutting Quality
Instructions for Grinding:
For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate
Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade
Since the carbide in the DITEC is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC carbide
| Manufacturer | Amana Tool |
|---|---|
| Part Number | ANDT12840 |
| Manufacturer’s Part | DT12840 |
| Weight | 3.450 lbs |
| Sold in Multiples of | 1 |
| Priced By | Each |
| Preorder | N |
| Application | Melamine |
| Arbor | 1″ |
| Blade Diameter | 12″ |
| Blade Material | Carbide Tipped |
| Kerf | 3.2mm |
| Number of Teeth | 84 |
| Bore Diameter | 1″ |
| Hook Angle | 0° |
| Tooth Grind Type | High Alternate Top Bevel |
