Availability: 46 in stock
Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type scoring blades, the kerf width changes with depth of penetration. Used in combination with our industrial saw blades ‘7’ series only (#714721, etc.). Also used in combination with the DITEC series panel saw main blades. Kerf range should match the main blade.
Features:
Exclusive DITEC Carbide Tips
Higher Reliability and Lower Maintenance
Low Noise Level
Laser Cut Saw Bodies
Excellent Cutting Quality
Instructions for Grinding:
For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate
Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade
Since the carbide in the DITEC is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC carbide
| Manufacturer | Amana Tool |
|---|---|
| Part Number | ANDT120T20 |
| Manufacturer’s Part | DT120T20 |
| Weight | 0.780 lbs |
| Sold in Multiples of | 1 |
| Priced By | Each |
| Preorder | N |
| Application | Scoring Particleboard/Laminate |
| Arbor | 20mm |
| Blade Diameter | 120mm |
| Blade Type | Chip-Free |
| Blade Material | Carbide Tipped |
| Kerf | 3.2mm – 4.2mm |
| Number of Teeth | 24 |
| Bore Diameter | 20mm |
| Hook Angle | 8° |
| Tooth Grind Type | Conical |
