Availability: 38 in stock
Used on panel saws or sliding table saws with separate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consist of two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to 3.6mm). Used in combination with our industrial saw blades with standard kerf (example #612721, #DT12721, etc.).
Features:
Exclusive DITEC Carbide Tips
Higher Reliability and Lower Maintenance
Low Noise Level
Laser Cut Saw Bodies
Excellent Cutting Quality
Instructions for Grinding:
For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate
Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade
Since the carbide in the DITEC is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC carbide
| Manufacturer | Amana Tool |
|---|---|
| Part Number | ANDT120T14-20 |
| Manufacturer’s Part | DT120T14-20 |
| Weight | 0.960 lbs |
| Sold in Multiples of | 1 |
| Priced By | Each |
| Preorder | N |
| Application | Scoring Particleboard/Laminate |
| Arbor | 20mm |
| Blade Diameter | 120mm |
| Blade Type | Chip-Free |
| Blade Material | Carbide Tipped |
| Kerf | 2.8mm – 3.6mm |
| Number of Teeth | 24 |
| Bore Diameter | 20mm |
| Tooth Grind Type | Alternate Top Bevel |
