Availability: 20 in stock
When cutting acrylics and plastics, “chip-welding” – a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2? negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.
A soft plastic cardboard made with super soft super flexible PVC. A polystyrene foam board bonded between two layers of Luxcell wood-fiber veneer. Decorative high-pressure compact laminate (HPL) with an integral surface.
Excellent for Cutting:
Plastics
Acrylonitrile Butadiene Styrene (ABS), Acetal, Acrylic, Acrylic Sheets, Alu panel
Copolymer, Coroplast, Correx Boards, Corrugated Polypropylene
Delrin
Ethylene-Vinyl Acetate
Foam Board
Gatorfoam
High Density Polyethylene (HDPE), High Impact Polystyrene (HIPS), High Pressure Laminates (HPL)
Low Density Polyethylene (LDPE), Lucite
Mechanical/Engineered Plastics
Nitrile Rubber
Nylon
Perspex Cast Acrylic Sheet, Plastic Laminate Flooring, Plexiglas, Poly (methyl methacrylate) (PMMA), Polycarbonate (Lexan), Polyethylene (PE), Polyethylene Terephthalate (PET), Polyethylene Terephthalate Glycol-Modified (PETG / PET-G), Polypropylene (PP)
Solid Surface
Styrene-Acrylonitrile
Styrene-Butadiene Rubber (SBR)
Styrene-Isoprene-Styrene (SIS)
Teflon, Thermoplastic Polyolefin (TPO), Tressa Meteon
Ultra High Molecular Weight Polyethylene (UHMWPE)
Wood
| Manufacturer | Amana Tool |
|---|---|
| Part Number | ANLB16121 |
| Manufacturer’s Part | LB16121 |
| Weight | 7.450 lbs |
| Sold in Multiples of | 1 |
| Priced By | Each |
| Preorder | N |
| Application | Acrylic/Plastic |
| Arbor | 1″ |
| Blade Diameter | 16″ |
| Blade Type | Non-Melt Plastic |
| Blade Material | Carbide Tipped |
| Kerf | 0.145″ |
| Number of Teeth | 120 |
| Bore Diameter | 1″ |
| Hook Angle | -2° |
| Tooth Grind Type | Modified Triple Chip Grind |
