- Type: Front Panel ONLY
- Controller Compatibility: IC-600PL, IC-600-M, IC-600-PP and IC-600-SS
Features & Benefits
Want it all? Gorgeous turf, advanced programming capability, and an intuitive interface? Meet the I-Core. Designed for demanding commercial and high-end residential applications, the full-featured I-Core controller is easy to use, easy to install, and easy to program, with a variety of new features that will redefine irrigation intelligence.
Modular means more options. And more options mean an easy install. The I-Core plastic is expandable from 6 to 30 stations and the metal is expandable to 42, for a broad range of choices to meet all of your customers’ needs.
I-Core’s real-time flow monitoring capability provides overflow protection and flow totaling to minimize the potential for water waste.
- IC-600-PL – 6-Station base domestic model with outdoor plastic cabinet, can be configured by adding modules up to 30 stations
- IC-600-M – 6-Station base model with metal cabinet, can be configured by adding modules up to 42 stations
- IC-600-PP – 6-Station base model with plastic pedestal, can be configured by adding modules up to 42 stations
- Modular controller expandable from 6 stations to 30 stations (plastic cabinet) and 42 stations (metal cabinet) with 6-station ICM modules
- Unique module design allows servicing of module without removing field wires from the controller
- Large, easy to read, backlit graphics display
- Removable front panel for remote programming
- Seasonal Adjustment by Program (globally, monthly, or daily by Solar Sync)
- Seasonal Adjustment: 0% to 300%
- 4 independent programs (A, B, C, & D)
- Multi-language capability, programmable in six different languages
- Diagnostic Dashboard continually monitors and displays system operation for flow, station and sensor status
- Automatic short circuit detection, skips shorted stations and continues watering, no fuses to replace
- Station run times: 12 hours
- Eight start times for Programs A,B, and C; 16 start times for Program D
- Program stack and overlap capability, any two programs can run concurrently
- Real time flow monitoring capability built in
- Flow learning by station and station level diagnostics, alarms and shutdowns
- Flow totalizer provides cumulative flow history
- Hunter Quick Check helps troubleshoot field wiring issues
- No Water Window capability
- Total run time calculator
- Test program feature
- One button manual start and advance
- Easy Retrieve Memory backup feature can save and restore preferred program
- Factory installed SmartPort connector for use with Hunter ROAM and ICR Remotes
- All models NEMA rated for weather resistance
- Programmable station delay up to 9 hours
- Programmable rain delay up to 180 days
- Cycle and Soak capability by station
- Multiple sensor inputs
- Rain sensor override
Product Details
- Transformer input: 120/240 VAC, 50/60 Hz
- Transformer output: 24 VAC, 1.5 A Station output: 24 VAC, 0.56 A (2 valves)
- Maximum total output: 24 VAC, 1.4 A (5 valves)
- Master valve output: 24 VAC, 0.28 A
- UL, C-UL, CE, C-tick
Steps to Replace the Front Panel on a I-Core Controller
| STEP ONE |
STEP TWO |
| Turn controller power off |
With the controller’s power off, open the face panel’s door (similar to how the front door of the controller was opened). |
| STEP THREE |
STEP FOUR |
| Once the front panel’s door is open, locate the grey ribbon cable in the top right corner on the back of the face panel. |
Carefully unplug the ribbon cable by pulling out on the black plastic plug. |
| STEP FIVE |
STEP SIX |
| Press the tab release on the back of the face panel door to the left to release the panel from the frame. |
With the tab release pressed, the face panel can be removed from the door frame. |
| STEP SEVEN |
| To install the new panel simply reverse this process. |
Specs
| Brand |
Hunter |
| Product Type |
Controller Repair Parts |
| Front Panel |
Yes |
| Warranty |
5 Years |
| Controller Compatibility |
IC-600PL |
