Availability: 36 in stock
Introducing the PWBS-14CS Bandsaw. It has an extra large, two-piece cast iron table. It consists of a 15″ x 15″ tilting section and a fixed 15″ x 5″ extension for a total working surface area of 15″ x 20″. A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter• quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6″ under guide capacity with 13-1/2″ frame to blade clearance. The aluminum rip fence comes with a resaw attachment.
• Precision balanced nine spoke cast iron wheels reduces vibration and creates smoother blade travel.
• Upper and lower dual ball bearing guides for accurate cuts.
• CARTER• quick tension lever speeds blade changes, and the de-tension setting extends blade life during non-use.
• Chip blower ensures a clean, visible cut line.
• Exclusively designed, quick-release precision T-square style rip fence with 4″ resaw attachment.
• 60 watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included).
• Easy to read tensioning gauge settings indicated in “blade width” increments.
• Durable micro-adjustable dual bearing blade guide system above and below the table for close blade control with less friction.
• Rigid one-piece welded stand requires no assembly.
• Includes 6″ riser block.
| Manufacturer | Powermatic Tools |
|---|---|
| Part Number | JPW1791216K |
| Manufacturer’s Part | PM9-1791216K |
| Weight | 221.000 lbs |
| Sold in Multiples of | 1 |
| Priced By | Each |
| UPC/EAN Code | 662755489372 |
| Product Condition | New |
| Preorder | N |
| Product Type | Drum Sander |
| Blade Speed | 3000 SFPM |
| Horsepower | 1.5 HP |
| Voltage | 115V/230V |
| Table Size | 15″ x 15″ |
| Maximum Tilt | 45° |
| Prewired Voltage (V.) | 115 |
| Motor Power (HP) | 1.5 |
| Blade Length (in) | 93-1/2 |
| Maximum Saw Blade Width (in) | 45355 |
| Table Height from Floor (In.) | 44 |
| Stand Type | Floor |
| Dust Port Outside Diameter (in) | 4 |
| Table Tilt (Deg.) | 10 Left, 45 Right |
| Blade Speed (SFPM) | 3000 |
| Minimum Saw Blade Width (in) | 45299 |
| Table Size (L x W) (In.) | 15 x 20-1/2 |
| Dust Collection Minimum CFM Required (CFM) | 600 |
| Motor Voltage (V.) | 115/230 |
| Motor Phase | 1 |
| Cutting Capacity Height (In.) | 6 (12 w/ Riser Block) |
| Cutting Capacity Width (In.) | 13-1/2 |
| Maximum Saw Blade Width (In.) | 45355 |
| Minimum Saw Blade Width (In.) | 45299 |
| Warranty | 5 years |
